Protection against dirty electricity from Smart Meters and the Smart Grid!

The SineTamer is trusted by global brands and top research facilities to manage their power and protect against transient spikes and dirty electricity (DE). Today, our homes are filled with dirty electricity on the electrical wires from modern devices like the smart meter, EV battery chargers, and inverters, to name a few. DE doesn't stop at the meter, it will travel from neighboring home to neighboring home, so even if you don't have a smart meter, you're home is at risk from what the neighbors have on their home.

The Sinetamer devices utilize special Frequency Attenuation circuitry protection that is frequency actuated rather than voltage actuated like all the competitors.  Unlike Stetzer-style plug-in filters, the Sinetamer actively tracks and follows the sine wave form in 360 degrees, enabling the unit to react much faster and more effectively to remove the unwanted energy, spikes and surges.  All 360° of the sine wave form is fully protected, rather than just above the extreme levels. Competitors only watch the top and bottom of the sine wave, leaving most of the sine wave form vulnerable to excess voltage levels from the transients.

SineTamer’s special Frequency Attenuation Protection also incorporates special RF and EMI filtration within its circuitry to remove levels of the higher harmful frequencies between 1 kHz right up to 10 MHz for the Smart Meters and electrical grid.  The SineTamer’s special frequency circuitry protection absorbs the excess transient energy from the power and eliminates it throughout the internal circuitry, leaving no residual energy to be injected back onto the power.  This enables the SineTamer to draw no power to function, only to light 2 Small LED lights to show operation status.

For farms and businesses, the Sinetamer is a leading technology for equipment protection, reducing repairs and operating costs. Typical recovery of investment is 4-10 months.

NOTE: The 1S1 unit available here online is for the typical home setup using 120/240 V Single Phase and effective for up to 600 Amps. .  If you have 3-phase or require greater voltage or Amps or need more than one electrical panel protected (in a home and barn or shop), request a quote to ensure the correct device and setup is ordered.

Actual analysis using an oscilloscope:

Installation should be completed by a licensed electrician. Installation instructions provided.